HMI Replacement: Keep the Same Brand or Switch? A Saudi Factory Guide

November 15, 2026 · Automation
HMI Replacement: Keep the Same Brand or Switch? A Saudi Factory Guide

EMAN FTC / Industrial automation guide

A replacement panel can arrive while the factory is still looking for the project files needed to use it.

The hardware is on site, but the application, software or access needed to restore it is missing.

That changes the purchasing decision. An HMI—the human-machine interface operators use to view process information and enter permitted commands—has to work with the machine’s existing control system.

For a factory planning HMI replacement in Saudi Arabia, keeping the original model or a verified compatible product can reduce engineering work when a usable application is available. Moving to a newer generation or another brand calls for a review of what can be transferred, what needs changing and how the result will be tested.

  • Facility managers
  • Factory teams
  • Controls engineers
  • Procurement teams
Compare replacement routes

Why Factories Often Keep the Original HMI Brand

The screens on a working machine represent a considerable amount of configuration. Behind each button or value are tag addresses, access permissions and operating rules. There may also be alarm histories, recipes, trends and scripts.

An integrator recommending the original platform may be trying to preserve that work. Operators already know the interface, maintenance staff may have the software, and the factory may hold a compatible spare.

Those are sound reasons to investigate the same-brand route. They still need checking against the proposed part number. Replacing an identical model and moving to a new product generation can involve very different amounts of work.

If the change also involves the PLC, drives or panel arrangement, consider it within the wider automation upgrade and retrofitting scope.

Confirm the Fault and Identify What You Are Replacing

Before ordering a panel, establish what has failed. A loss of PLC communication, an incorrect tag or a supply problem can appear to the operator as an HMI fault. Diagnosis should identify the cause and the equipment actually affected.

The device architecture matters too. A touch monitor connected to an industrial PC is different from a panel running its own HMI application. Some units also contain control functions: Schneider Electric’s HMI controller range combines the interface and controller in one product.

Replacing such a unit may therefore involve the control application as well as the screens.

Gather the HMI identification label, revision information, PLC model and available drawings. Photographs of the installed arrangement help the engineer understand what is connected. EMAN FTC’s HMI troubleshooting and configuration services cover related diagnostic work.

Can You Recover an Editable HMI Project?

A folder called “HMI backup” needs a closer look. It might contain an editable engineering project, a restore image, runtime files or exported operating data. Each has a different use.

An editable project can support changes in the appropriate engineering software. A restore backup may help recover a compatible panel without providing the source needed to modify or migrate the application. Screenshots can document appearance, but they leave the underlying configuration unresolved.

Schneider provides a concrete example in its Vijeo Designer/Magelis upload guidance. For the applications covered by that guidance, later upload depends on the project having been downloaded with the Include Editor Project option and the specified storage configuration.

Check what can be recovered before committing to a replacement. Open the available project with the correct software where authorized, identify the versions and licences involved, and establish whether a restore can be verified on suitable hardware.

If the old panel has failed and the source cannot be recovered, the team may need additional records to reconstruct and validate required behaviour. That work belongs in the quotation and schedule.

Same Model, Same-Brand Upgrade or Different Brand?

There are three routes worth comparing:

Three routes for replacing an industrial HMI
Route When to consider it Work to verify Principal uncertainty
Exact model or verified compatible revision A suitable replacement and usable application or backup are available. Restoration, firmware/application compatibility, physical fit and functional testing. Whether the available files work on the proposed unit.
Newer generation within the same brand A documented migration path offers an appropriate supported platform. Conversion, changed features, software requirements, interfaces and testing. How much of the existing application can be reused.
Different brand Availability, support or plant standardization provides a reason to change. Driver support, application conversion or recreation, licences and complete functional verification. The effort required to reproduce the agreed behaviour.

Manufacturer guidance is useful here. Schneider’s published replacement reference for the Magelis XBTGT4330 identifies HMIGTO4310 and another hardware arrangement as replacement options. It is a transition reference; current lifecycle, availability and application compatibility still need confirmation.

Siemens offers another example. Its WinCC Unified migration guidance describes transferring project content with Data2Unified alongside manual editing. The scope depends on the source and target platforms and the software versions involved.

Ask the engineer to identify the content that will transfer and the functions needing further work. A brand name on both panels does not answer that question.

Check PLC Compatibility and the Functions Operators Use

Start with the exact PLC and HMI models, firmware and engineering environment. Then check the supported communication driver and the required connection.

An Ethernet port establishes the physical connection. The HMI still needs suitable protocol and driver support for the controller. Schneider’s Siemens TIA Ethernet driver guidance lists supported and unsupported HMI families, showing why compatibility checks need to reach the model-family level.

Once communication is established, verify what operators can see and do. A process value may update while its units, decimal position or scaling are incorrect. A screen can look familiar while a recipe, alarm acknowledgement or user permission behaves differently.

Review the required functions with production and maintenance staff. Include language display where the facility uses multiple languages. Check the panel cutout, installation depth, power requirements and operating conditions alongside the software.

Where problems involve the controller or network, PLC troubleshooting and maintenance may form part of the assessment. A wider controller change deserves a separate review of whether to retrofit or replace the PLC.

Compare the Full Replacement Cost

Two quotations can both say “HMI replacement” and cover different jobs. One might include migration and commissioning; another might cover the panel alone.

Compare them against an agreed scope. Establish whether the price includes engineering, runtime licences, mounting changes, testing, operator training and the final project files.

For procurement in Riyadh, Dammam, Jubail or Jeddah, obtain written availability for the exact part number and an agreed delivery date. Confirm who will provide technical support during the shutdown and how warranty issues will be handled.

EMAN FTC’s HMI and automation catalogue includes product options for discussion. A catalogue listing needs a model-specific suitability and availability check before it becomes a purchasing recommendation.

Include the factory’s agreed shutdown assumptions in the comparison. A lower hardware price can come with additional engineering or site work, so the equipment price alone leaves the project cost incomplete.

Plan the Shutdown and a Workable Recovery Route

Prepare what can be prepared before the shutdown: review the files, confirm the equipment, resolve software requirements and carry out the agreed offline checks.

Decide which functions need the installed PLC and equipment for verification. Assign responsibility for those tests and identify who can approve the return to operation.

The recovery plan needs particular attention when the original HMI has already failed. Putting that failed unit back into the panel is not a workable fallback. Establish a tested compatible spare or another approved recovery arrangement.

Agree when an unsuccessful changeover must stop and who makes that decision. For hospital utility equipment, coordinate the work window and required operating arrangements with the responsible facilities team.

What Must Pass Before Production Restarts?

Seeing the home screen is an early check. Acceptance needs evidence that the configured functions work with the installed system.

The responsible controls engineer should define safe test conditions and acceptance criteria. Depending on the application, the plan may cover commands, process values, alarm acknowledgement, recipes, permissions, communication-loss indications and agreed restart behaviour.

The following is an illustrative test record, not an EMAN FTC project result. It shows how a display discrepancy could be documented without losing the original finding.

Illustrative HMI acceptance-test record — not an EMAN FTC project result
Record field Illustrative entry
Function Pump discharge-pressure display.
Expected result HMI indication agrees with the approved PLC scaling and validated source reading.
Observed result At a controlled test point of 4.0 bar, the HMI displays 40.0 bar.
Correction Investigate the tag, data type and display configuration; correct the confirmed cause under the approved procedure.
Retest Record the results at the agreed test points and retain the original failed result.
Sign-off Record approval by the responsible engineer and required site witness after successful verification.

EMAN FTC’s FAT and SAT guide for control panels explains how test records can link expected behaviour, observed results, corrections and retests.

What Should the Factory Receive at Handover?

The final files should describe the configuration accepted on site. If the project changed during commissioning, the handover copy needs to include those changes.

Agree the deliverables before work begins. Useful records include:

  • The editable project and restore backup included in the contract.
  • Final hardware, firmware and software-version references.
  • Relevant settings, network information and as-built drawings.
  • Test results, outstanding items and closure records.
  • Licence ownership and authorized maintenance-access arrangements.

Give someone responsibility for maintaining these records. A project stored only on a contractor’s laptop leaves the factory dependent on finding that person during the next fault.

For project-specific support, contact EMAN FTC with the existing panel and PLC details, available files and the required work window.

Frequently Asked Questions

Can I change the HMI brand and keep the existing PLC?

It may be possible. The replacement needs suitable driver and protocol support, and the application must be converted or recreated and tested against the required functions.

Is a restore backup the same as an editable project?

They serve different purposes. Confirm what the file contains and what the platform allows. A restore backup may recover a compatible panel without providing an editable engineering project.

Does an obsolete HMI always require switching brands?

Check the manufacturer’s documented successors first. A suitable same-brand route may exist, although compatibility and conversion work still need assessment.

Can a same-brand replacement require reprogramming?

Yes. Moving between product generations or engineering platforms can require conversion and manual changes. Ask which functions will transfer and how the remaining work will be verified.

How long will HMI replacement take?

The useful estimate comes after checking the files, target hardware, migration work and test scope. Confirm preparation time separately from the shutdown time required on site.

What should I send for a technical assessment?

Provide the HMI part number, PLC model, photographs, fault description, available project or backup files, site location and permitted work window. Share sensitive files and access information through an agreed secure channel.