Services

Industrial Automation & Control Services

Name: EMAN FTC
Address: Office #i-26, 1st Floor, Building No: 7036, Sayda Street, Ad Duraihimiyah District, Riyadh, Riyadh, 12796, Saudi Arabia
Telephone: +966 58 339 5756

What We Do

Expert installation, configuration, and maintenance of VFDs, PLCs, HMIs, SCADA, and complete automation systems.

PLC, SCADA, HMI & VFD Solutions

EMAN FTC specializes in delivering industrial automation and control solutions for both industrial and commercial facilities throughout Saudi Arabia. Our expert team handles PLC, SCADA, HMI, VFD, soft starter, and motor control systems, providing installation, troubleshooting, configuration, upgrades, maintenance, testing, and commissioning. We also support existing automation systems, assisting with fault diagnosis, modifications, and equipment replacement as needed.

We offer support for both new and existing control systems, addressing issues such as communication faults, drive errors, control problems, and outdated components. Whenever feasible, we modify, reconfigure, or upgrade existing equipment rather than opting for complete replacement. We also provide preventive maintenance and system retrofitting services to improve reliability and minimize unexpected downtime.

Automation Services We Provide

Variable Frequency Drive (VFD) Installation & Commissioning Services
VFD Parameter Setting, Configuration & Optimization
Soft Starter Installation & Configuration Services
PLC Troubleshooting & Maintenance Services
HMI Troubleshooting & Configuration Services
SCADA System Integration & Support Services
Control System Fault Analysis Services
Control Panel Troubleshooting & Maintenance Services
Automation system upgrades and retrofitting
Preventive maintenance for automation systems
Testing and commissioning of control and automation systems

Automation System Support

PLC Troubleshooting

We assist with PLC faults, logic-related issues, communication problems and required system modifications based on the condition of the existing control setup.

SCADA & HMI Support

Our team supports SCADA and HMI systems for configuration, communication troubleshooting, diagnostics, and required system changes.

VFD Configuration & Troubleshooting

We support VFD installation, parameter setting, fault diagnosis, and commissioning for motor control applications.

Our Automation Project Experience

Our team has supported automation and control projects across Saudi Arabia, including VFD installation, PLC upgrades, process automation, HMI and SCADA systems, and control system commissioning. See examples of our completed work and technical project experience.

View Our Automation Projects

Brands We Work With

We strategically partner with industry-leading manufacturers to ensure world-class reliability, seamless integration, and safety for every project.

ABB

Schneider

Siemens

Danfoss

Mitsubishi

Omron

Bosch

Chint

Eaton

Fluke

Hager

Havells

Hikvision

Hochiki

Honeywell

Legrand

Naffco

Nexans

Notifier

Osram

Panasonic

Philips

Prysmian

Samsung

LS Electric

Allen-Bradley

Megger

Questions & answers

Frequently asked questions

What automation and control services does EMAN FTC provide in Saudi Arabia?

EMAN FTC provides industrial automation and control services including PLC troubleshooting, VFD installation and parameter setting, HMI configuration, SCADA support, soft starter configuration, system fault analysis, retrofitting, preventive maintenance, testing, and commissioning.

Do you provide PLC troubleshooting services in Riyadh?

Yes. EMAN FTC provides PLC troubleshooting and modification services for industrial and commercial systems in Riyadh and other locations in Saudi Arabia. The team can inspect PLC-related faults and work on existing control systems based on the site requirements.

Can EMAN FTC install and configure Variable Frequency Drives (VFDs)?

Yes. VFD services include installation, parameter setting, configuration, troubleshooting, and optimization. The correct setup depends on the motor, load, control method, and operating requirements of the application.

Do you install and configure soft starters?

Yes. EMAN FTC provides soft starter installation and configuration for suitable motor-control applications. The equipment and settings are selected according to the motor and operating conditions.

Can you troubleshoot an existing industrial automation system?

Yes. Existing automation systems can be inspected for PLC, HMI, VFD, SCADA, control wiring, communication, and other control-related faults. The exact work is determined after reviewing the system and the reported problem.

Do you provide HMI configuration and diagnostic services?

Yes. EMAN FTC provides HMI configuration and diagnostics for industrial control applications. This can include checking communication with PLCs, reviewing existing configurations, troubleshooting display or control issues, and making required modifications.

Does EMAN FTC provide SCADA support and maintenance?

Yes. SCADA system support and maintenance are part of EMAN FTC's automation services. Support may include troubleshooting, system checks, communication issues, configuration review, and maintenance of existing SCADA installations.

Can you find faults in control and automation systems?

Yes. EMAN FTC provides control system fault analysis to identify problems affecting automation equipment and system operation. Engineers can inspect the relevant PLC, VFD, HMI, SCADA, control components, and system connections to locate the source of the fault.

Can an old automation system be upgraded instead of completely replaced?

In many cases, yes. EMAN FTC provides automation system upgrading and retrofitting for existing installations. The available options depend on the condition of the equipment, compatibility of existing components, spare-part availability, and the required changes.

Do you provide preventive maintenance for automation systems?

Yes. Preventive maintenance is available for automation and control systems. Maintenance can include inspection, operational checks, fault review, parameter verification, and identification of components that may require attention before they cause operational problems.

Do you provide testing and commissioning for control systems?

Yes. EMAN FTC provides testing and commissioning for control and automation systems. This work is carried out after installation or modification to check system operation, control functions, equipment settings, and communication between related components.

Which automation brands does EMAN FTC work with?

EMAN FTC works with automation and electrical equipment from manufacturers such as Siemens, Schneider Electric, ABB, Danfoss, Mitsubishi, Omron, Eaton, LS Electric, and Allen-Bradley. Brand suitability depends on the existing system and project requirements.

Does EMAN FTC handle both new automation installations and existing systems?

Yes. Services cover new installations as well as troubleshooting, modification, maintenance, upgrading, and retrofitting of existing automation systems. This allows a project to be assessed based on what is already installed rather than automatically replacing the complete system.

How can I request a quote for PLC, SCADA, HMI, or VFD services?

You can contact EMAN FTC with the equipment details, system problem, project location, and required service. For automation and control enquiries, call +966 58 339 5756 or submit a quote request through the EMAN FTC website.

Does EMAN FTC provide automation and control services outside Riyadh?

Yes. EMAN FTC provides electrical, automation, and control services for projects across Saudi Arabia. To discuss service availability for your location and project, call +966 58 339 5756 and provide the site location, equipment details, and required work.