Indoor & Outdoor Lighting Services in Riyadh Saudi Arabia

Indoor LED high-bay lighting and outdoor facility lighting for industrial buildings in Saudi Arabia.

EMAN FTC provides indoor and outdoor lighting services in Riyadh and across Saudi Arabia, including installation, LED upgrades, fault repair and maintenance for warehouses, factories, offices and outdoor areas.

Dead high-bays, flood lights that give up every summer, exit signs nobody has tested in a year: most lighting problems don’t need a full rip-out. EMAN FTC installs, upgrades and maintains lighting for warehouses, factories, commercial buildings and contractors, from our Riyadh base.

What we do

Lighting system installation

New lighting for buildings, extensions and fit-outs, indoors and outdoors.

Replacement & retrofitting

Swap old fixtures or lamps for LED without rebuilding the electrical system. Worth looking at when fittings are failing or expensive to run.

Maintenance & fault repair

Fault finding, indoor and outdoor maintenance, emergency and exit light testing, and street and flood light maintenance.

Working on a runway or taxiway? That’s a separate specialty: see airport lighting services.

Indoor and outdoor jobs are different problems

Indoors

In a high-bay warehouse, reaching the fixture is a big part of the job: lifts, shutdown windows, closed aisles. Replacing a failing fixture and its neighbours in one visit usually beats a string of callouts.

Offices and corridors are simpler, but emergency and exit lights are a safety item. They need testing on a schedule, not just when someone remembers.

Outdoors

Riyadh summers regularly pass 45°C, and fine dust gets into everything. When a flood light dies, the cause can be the driver, water or dust getting in, or a fixture that was never rated for the site, not just the lamp. We look at why it failed before quoting a replacement, so you don’t buy the same failure twice.

Near the coast in Jeddah, Dammam or Jubail, salt air adds corrosion. Ask for housings and coatings suited to it.

Typical jobs we take on

  • A warehouse where high-bays are failing one by one

    Older metal halide or fluorescent fittings drop out, and each replacement costs a lift and a closed aisle. The fix is usually a planned retrofit to LED high-bay lights, done aisle by aisle so operations keep running. See our retrofitting service.

  • A yard or perimeter that keeps going dark

    We inspect the failed units first. If the problem is the fixture rating, not bad luck, we replace with correctly specified LED flood lights. If it’s a connection or a single component, we repair it and leave the rest alone.

  • An inspection or handover coming up

    Emergency and exit lights get tested, and units that fail are flagged for maintenance or replacement before anyone else finds them. This sits under our maintenance services.

  • A remote laydown area or access road with no easy power

    Solar lights can save trenching and cabling. Check sizing for the shortest winter days, and plan to clean the panels, because dust cuts output.

Products we supply

Browse everything on the lighting products page. EMAN FTC lists Philips, Osram, GE, Panasonic, Opple, Schneider Electric, ABB, Zumtobel and Havells among the brands it works with; which one fits depends on your application and specification.

Whoever supplies your fixtures, ask for the datasheet (IP rating, rated ambient temperature, rated life) and the SASO conformity paperwork before you approve them. It takes five minutes and avoids most nasty surprises.

Where we work

We’re based in Riyadh (Sayda Street, Ad Duraihimiyah District) and take lighting work across Saudi Arabia. Our wider electrical and automation team has worked at sites in Jeddah, Jubail, Dhahran and Makkah; you can see them on the projects executed page. For a site outside Riyadh, send us the location and we’ll confirm availability.

What to send for a quote

  • The site location and type: warehouse, factory, office, yard, road.
  • Floor area, and ceiling or mounting height.
  • What’s installed now: fixture type, roughly how many, and a photo of a fixture label if you have one.
  • What you need: new installation, an LED upgrade, a repair, or testing.

Frequently asked questions

Do I have to replace everything to switch to LED?

Not always. A retrofit upgrades fixtures or lamps without replacing the whole electrical system. Whether it makes sense depends on the existing fixtures, the light output you need, the area and the operating conditions.

Can you work on a lighting system someone else installed?

Yes. Existing systems can be inspected for fault repair, maintenance, replacement or retrofitting, so you don’t need a brand-new installation to get help.

Do you cover cities outside Riyadh?

EMAN FTC is based in Riyadh and provides lighting solutions across Saudi Arabia. Call or message us with the site location and the work you need, and we’ll confirm availability.

Do you supply the fixtures as well as install them?

Yes. We supply high bay, flood, panel and solar lights, and install them. The brands we work with include Philips, Osram, GE, Panasonic, Opple, Schneider Electric, ABB, Zumtobel and Havells. The right choice depends on your application and specification.

Which light should I use for a warehouse with high ceilings?

High-bay lights are the usual choice. The right model depends on mounting height, the light level you need, your aisle and racking layout, and the dust and heat in the building. Send us the floor area and ceiling height and we’ll recommend options.

Why do outdoor lights fail so often in Riyadh?

Common causes are summer heat stressing the driver, dust and water getting into the fixture, and fixtures that weren’t rated for the site. Replacing the lamp alone won’t fix those. We inspect the failed unit first, then decide between repair and replacement.

Do you test emergency and exit lights?

Yes. Testing shows which emergency and exit lights work and which need maintenance or replacement. How often to test depends on the fire and safety requirements that apply to your building, so confirm the schedule with your safety consultant or the relevant authority.

Are solar lights suitable for industrial sites?

They can work well for remote areas, access roads and laydown yards where running cable is impractical. Check that the system is sized for the shortest winter days, and plan to clean the panels, because dust reduces output. For high-demand areas, mains-powered fixtures are usually the safer choice.

What should I ask a supplier before approving a fixture?

Ask for the datasheet, covering IP rating, rated ambient temperature, rated life and warranty, plus the SASO conformity paperwork. For sites near the coast in Jeddah, Dammam or Jubail, also ask about corrosion-resistant housings and coatings.

What do I need to send for a quote?

Send the site location and type, floor area, ceiling or mounting height, what’s installed now (fixture type and rough count, ideally with a photo of a fixture label), and what you need: new installation, an LED upgrade, a repair or testing. Call +966 58 339 5756 or use the contact form.

Request This Service

Let us help you build reliable, efficient, and safe electrical and automation solutions for your business.