EMAN FTC / Electronics & Low Current
Plan your CCTV installation around the footage your team needs.
EMAN FTC provides CCTV camera and recording system installation for commercial and industrial facilities in Saudi Arabia. Share your site layout, existing equipment and coverage priorities so the team can assess the cameras, recorder and installation work required.
Installation scope
A CCTV installation can include a site assessment, camera mounting, cabling, recording configuration and commissioning. The quotation should state the equipment, recording requirements, tests and handover items included in your project.
CCTV Installation for Warehouses, Factories and Commercial Facilities
The first question is what your team needs to see. A broad view of a yard serves a different purpose from a camera covering an entrance or a stock-handling point. Camera positions and recording settings should follow those objectives.
| Facility | Areas to review | Practical consideration |
|---|---|---|
| Warehouses | Entrances, loading bays, storage aisles and vehicle access | Tall racks, stacked goods and parked vehicles can block a planned view. |
| Factories | Designated production areas, stores, entrances and restricted-access points | Check lighting, dust, vibration, operating conditions and maintenance access. |
| Hospitals | Locations approved by the responsible facilities and security teams | Review permitted coverage, privacy and access to recordings before approving camera positions. |
| Offices and commercial buildings | Entrances, reception areas, corridors and service access | Balance the required image detail with the layout and authorized monitoring needs. |
CCTV camera and recording installation forms part of our Electronics & Low Current Services. Tell us which areas matter most and whether the building will remain operational during the work.
Site Survey and Camera Coverage Design
A useful assessment starts with your layout, working hours, lighting and existing infrastructure. Identify the areas requiring coverage, the detail needed there and any restrictions on mounting or cable routes.
For example, a warehouse entrance camera may show everyone entering the building while leaving the aisle behind a tall rack out of view. Reviewing the intended camera positions against actual sightlines helps identify that gap before equipment is selected.
Agree the survey output in the proposal: camera locations and IDs, monitored areas, mounting constraints, cable routes and an equipment schedule. Include responsibility for checking applicable Saudi requirements, privacy constraints and any required approvals.
If the required nighttime image depends on improving the area's lighting, scope that work separately. Our lighting system installation services cover related lighting requirements for commercial and industrial projects.
CCTV Cameras, NVR/DVR Recording and Storage Planning
Choose cameras for their intended view, lighting and operating environment. Then match the recording equipment to the camera technology, supported functions and existing infrastructure. NVR means network video recorder; DVR means digital video recorder.
EMAN FTC's CCTV and recording equipment catalogue includes camera, NVR and DVR enquiry options. The examples below are starting points for an equipment discussion; the exact model, compatibility and availability need confirmation for your project.
Indoor camera
Hikvision Dome CCTV Camera
An existing catalogue enquiry option for discussing indoor camera requirements.
Enquire about this productOutdoor camera
Dahua Bullet Security Camera
Discuss external coverage, mounting conditions and the required model specification.
Enquire about this productNetwork recording
Honeywell Network Video Recorder
Discuss an NVR requirement alongside camera compatibility and recording capacity.
Enquire about this productDVR recording
Hikvision DVR Recording System
Start a DVR equipment enquiry when reviewing a compatible existing installation.
Enquire about this productFor recording capacity, put the assumptions in writing:
- Camera count and anticipated recording bitrate.
- Recording schedule, codec and image settings.
- Required retention period for the facility.
- Usable storage, with the allowances needed for the selected architecture.
The recorder also needs to handle recording, search and playback under the intended workload. Axis's video surveillance storage guidance explains why performance and capacity both need consideration. Our industrial CCTV planning guide includes a worked storage example and further equipment-planning detail.
Cabling, Network Configuration and Authorized Remote Viewing
Include the installation infrastructure in the scope: mounts, containment, cable routes, terminations, labels, switches and rack space. Where supported PoE equipment is proposed, review the switch power budget alongside network capacity and cable requirements.
You can enquire about Cat6 network cable as part of the materials discussion. Existing network links, backup power and any additional infrastructure should be identified before the installation price is agreed.
For remote viewing, specify who can view live video, review recordings or export footage. Agree the supported access method with the client's IT team, including responsibility for accounts and ongoing maintenance access.
Where the project includes entry monitoring, review compatible access control equipment and the required integration separately. Confirm which functions are supported and included in the quotation.
Upgrading or Expanding an Existing CCTV System
You may be able to retain some cameras, cabling or network equipment. Send the existing camera and recorder model numbers, available firmware or software details, photographs and the functions you need to keep.
An upgrade assessment should establish what can be reused, where capacity is limited and which components need changing. Adding cameras may also change the recording, storage, network or licensing requirements.
For an occupied factory or hospital, agree the working window and any interruption arrangements before changeover. A proposal should make clear how the work affects the existing coverage and what needs testing before the new arrangement is accepted.
Testing, Commissioning and Customer Handover
Agree acceptance criteria before installation. The checks should cover the required recorded-image detail, relevant day/night conditions, timestamps, recording, search, playback, export and user permissions.
The following is an illustrative acceptance check, not an EMAN FTC project result. It shows how a simple footage-retrieval task can be recorded at handover.
| Check | Example acceptance record |
|---|---|
| Location | Loading-bay camera, identified on the agreed camera schedule. |
| Task | An authorized operator finds the recording from an agreed test time. |
| Evidence | The recorded view shows the detail required by the approved acceptance criteria. |
| Export | Export the agreed clip and verify playback using the agreed method. |
| Result | Record pass/fail, corrections, any retest and the required acceptance sign-off. |
Document supported fault notifications and any agreed interruption/recovery checks with the site team. Verify the configured retention target, then arrange a follow-up check of available recording history after a suitable operating period.
Set the handover documents in the quotation. These may include the camera/device register, as-built layout, supported configuration backups, licence records, operating instructions, authorized administrator-access transfer and test results.
Installation Costs, Warranty and Maintenance Options
Two CCTV quotations can cover different amounts of work. Compare the camera and recorder specifications, usable storage, cable routes, mounting access, switches, relevant licences and any backup-power provision alongside installation and commissioning.
Ask which tests, documents and user training are included. Confirm warranty handling and whether ongoing maintenance forms part of the offer or requires a separate agreement.
Where maintenance is requested, discuss camera cleaning, recording checks, supported fault alerts and configuration reviews. Remote-viewing access and a staffed monitoring service are separate requirements; specify any monitoring service explicitly if needed.
CCTV Installation in Riyadh, Dammam, Jubail and Jeddah
EMAN FTC is based in Riyadh. For a project in Riyadh, Dammam, Jubail, Jeddah or elsewhere in Saudi Arabia, send the site location and scope so the team can confirm service availability and assessment arrangements.
For regional projects, include drawings, existing equipment details, the required working window and site-access conditions. Those details help establish the preparation, materials and site work involved.
CCTV Camera and Recording System Installation FAQs
What is included in CCTV installation?
The agreed scope can include site assessment, camera installation, cabling, recorder configuration, network connections, testing and handover. Ask for the equipment, recording requirements, documents and any ongoing services to be listed in the quotation.
Can existing cameras and cabling be reused?
They need assessment first. Compatibility, equipment condition, cable performance, recorder capacity and the functions you need to retain affect what can be reused. Share the existing model numbers and available system records before selecting replacement equipment.
How is recording storage capacity selected?
Use the camera count, expected bitrate, codec, recording schedule and required retention period to establish the design assumptions. Specify usable storage and the allowances appropriate to the selected architecture, then confirm the intended recording and playback workload.
Will CCTV recording continue if the internet goes down?
It depends on the installed architecture. Local recording may continue without an internet connection when the required cameras, local network, recorder and power remain available. Remote viewing can be affected separately. Ask for the expected behavior of your proposed system to be documented.
Can authorized staff view CCTV remotely?
Compatible systems can support authorized remote viewing. The method, user permissions and client IT requirements need to be agreed during configuration. Specify who needs live viewing, recording access or export permissions, and who will maintain those accounts.
What is tested before handover?
Agree checks for coverage, required recorded-image detail, timestamps, recording, footage search, playback, export and user permissions. Include supported fault notifications and any agreed recovery checks. Record results, corrections and acceptance against the approved scope.
How long will installation take?
The schedule depends on equipment availability, site size, cable routes, mounting access, configuration work and permitted working hours. Provide the layout and project details so preparation time, site work and testing can be estimated separately.
What information is needed for a quotation?
Send the site location, facility type, layout, priority coverage areas, existing equipment and recording requirements. State whether the project is a new installation, expansion or replacement, and include your required working window and available technical specifications.
Request a CCTV Site Assessment and Installation Quotation
Tell us what you need to see and record, where the site is located and what equipment is already installed. Attach or describe the available drawings and technical requirements when you contact EMAN FTC.
Include the facility type, priority coverage areas, recording requirements and permitted work window in your message. The team can then review the enquiry and confirm the next assessment or quotation step.
Call +966 58 339 5756 Email info@emanftc.com
Service provider: EMAN Future Trading Company, Riyadh, Saudi Arabia.