Home > Lighting Solutions
Better energy performance by implementing innovative and turnkey lighting solutions. For industrial, commercial, and residential markets. EMAN Future Trading Co. offers lighting solutions for both construction and retrofit projects in many brands i.e. Philips, Osram, Al-Raed, Nasco, Hyundai, Ultra-Light, Opple, FSL and Nerfa.
High bay lights are used to light up spaces whose ceilings are higher than 20ft from the floor and around 40ft.
LED Tube Lights are most often used in commercial, industrial, and retail settings, but they can also be used in residential settings.
Flood light bulbs are specifically designed to light outdoor areas. Flood lights work by “flooding” an area with light. They can produce wider beams of light, usually up to 120 degrees.
A street light, light pole, lamppost, street lamp, light standard, or lamp standard is a raised source of light on the edge of a road or path.
Wall lights are commonly used as general lighting, decorative lighting, or accent lighting. They're also used as a source of supplementary light, like task lighting.
The system consists of a pair of synchronized flashing lights located laterally on each side of the runway threshold. REILs may be either omnidirectional or unidirectional facing the approach area. They are effective for: Identification of a runway surrounded by a preponderance of other lighting.
Taxiway centerline lights are used to facilitate ground traffic under low visibility conditions. They are located along the taxiway centerline in a straight line on straight portions, on the centerline of curved portions, and along designated taxiing paths in portions of runways, ramp, and apron areas.
Runway lights enable safe and efficient airport operations during takeoff, landing, and taxiing. These lights typically indicate the runway edge, threshold, centerline, and touchdown zone.
Visual navigational aid (NAVAID) that uses flashes of light and color to indicate the location of airports, airfields, landmarks, heliports, or obstructions.
Aviation obstruction lighting is used to enhance the visibility of structures or fixed obstacles which may conflict with the safe navigation of aircraft.
The wind cone, also called the 'windsock' is a colorful tool at each airport that offers relevant information to pilots, allowing them to quickly and easily determine the approximate wind speed and direction before taking off or landing.
Solar runway lighting does not require cables, CCRs and transformers. It is powered by solar panels. Every light is connected to an individual solar panel. Control over the lights is performed by a wireless mesh network (again NO cables).
Transformers and connectors are critical for safely powering a wide range of aviation equipment, including: Communications Systems. Lighting Equipment. Navigation Instruments.
The regulators are air cooled and designed to accurately regulate the output current to within ±3% of the adjustable nominal level from no load to full load.
Airport pavement markings and signs provide information that is useful to a pilot during takeoff, landing, and taxiing.
Light & perimeters helps mark helipad touchdown and lift-off area (TLOF) and/or final approach and takeoff area (FATO) for metal helidecks and pavement heliports.